WATER PUMP 6V - 12V WITH 1M SILICONE TUBE, KITRONIK 2567

Description

This R385 diaphragm pump is the perfect choice for any project that requires water to be moved from one place to another. The pump is supplied with 1M of silicon hose that you can cut to your requirements, the hose provides a good seal and will not leak.

Possible uses/projects include; a small aquarium pump, automatic plant watering system, making a water feature or music activated dancing water features to name but a few. When pumping a liquid the pump runs very quietly. The pump is also capable of pumping air, though when pumping air the pump is quite noisy in comparison.

The pump requires between 6 - 12V DC and between 0.5 - 0.7A and will deliver its maximum operating values when power is at the upper end of these ranges.

The pump can handle pumping heated liquids up to a temperature of 80 degrees Celcius and when suitably powered can suck water through the tube from up to 2m and pump water verticaly for up to 3m.

Note:

The +ve connector on the pump is indicated with a red mark.

Features:

• Maximum suck range of 2m.
• Maximum head range of 3m.
• Works with liquids of up to 80 degrees celcius.
• Maximum flow rate of up to 1 - 3L/min.

Contents:

• 1 x R385 diaphragm pump.
• 1 x 1M Silicon tube.

Dimensions:

Length: 86mm.
Width: 43mm.
Pipe Inside Diameter: 6mm.
Pipe Outside Diameter: 8.5mm.

Requires:

6 - 12V DC / 0.5 - 0.7A power supply.